Cross-Ply Patch BN7 (3ply) 165 mm - 2-11-493
- Patch for tire repairs. 16,5cm. 3ply. For agricultural vehicles. Bias ply.
Bias Tire Patch EURO BN7 165 mm (3-Ply) – Xtra Seal
Diagonal tire repair insert | Type BN7, 3-ply cord | Brand: Xtra Seal | Sold as: 1 pc.
The EURO bias tire patch BN7 165 mm from Xtra Seal is a 3-ply repair insert built exclusively for bias-ply tires — both tube-type and tubeless. Compared to the 2-ply BN series (BN2–BN5), the BN7 steps up in two respects at once: it is notably larger (165 mm) and adds a third cord layer. Three layers of crosswise cord increase the insert's resistance to tensile and shear stress, making it suited to extensive damage in truck and agricultural tires operating under high load. It can also serve as a valve housing for truck and agricultural inner tubes. The slit mylar backing is peeled off right before mounting. It works with cold and hot vulcanization.
Product Overview – Bias Tire Patch EURO BN7 165 mm 11-493
The patch consists of black rubber over a blue tie gum, which creates a durable bond with the inner liner surface once cured. Three layers of crosswise bias cord (3-ply designation) provide a higher level of reinforcement than the 2-ply BN variants — the cord runs crosswise in a pattern matching the bias tire's structure, and the third layer increases resistance to forces acting at the repair under high pressure and load. Thin, even edges lower the risk of the patch lifting at the edges.
Like the other patches in the BN line, the BN7 can serve as a valve housing for truck and agricultural inner tubes — useful when the original valve housing is damaged. The slit mylar backing is peeled off right before the patch is applied to the prepared, cement-coated inner surface.
Features and Specifications
Three layers of crosswise cord — higher stress resistance than the 2-ply BN variants.
Notably wider than the BN5 (135 mm) — for extensive damage requiring broad coverage.
Works with both tube-type and tubeless bias tires.
Creates a durable, sealed bond between the patch and the tire inner surface.
Protects the patch base from contamination and peels off easily right before mounting.
Can also serve as a tube valve housing for truck and agricultural inner tubes.
Technical Specifications
| Parameter | Value |
|---|---|
| Part number | 11-493 |
| Brand | Xtra Seal USA |
| Product type | Bias EURO tire patch |
| Designation | BN7 |
| Diameter | 165 mm |
| Cord layers | 3 (bias/diagonal) |
| Material | Black rubber over blue tie gum |
| Protective layer | Slit mylar |
| Primary use | Bias-ply tire repair (tube-type and tubeless) |
| Secondary use | Tube valve housing for truck and agricultural tubes |
| Cure methods | Cold, hot |
| Sold as | 1 piece |
Applications
Where This Patch Is Used
- Repair of extensive damage in bias-ply truck tires under high load
- Repair of bias-ply tires on agricultural and construction equipment
- Repairs requiring 3-ply cord reinforcement for high-stress conditions
- Tube valve housing for truck or agricultural inner tubes
- Professional tire repair shops and vulcanizing workshops
Frequently Asked Questions
How does the BN7 differ from the BN5?
The BN5 (11-492) has a 135 mm diameter and two cord layers; the BN7 (11-493) has 165 mm and three cord layers. This is a qualitative step up, not just a size increase: the additional cord layer in the BN7 increases the insert's resistance to stress, making it the right choice for more demanding repairs or tires operating under extreme load conditions.
Can BN7 bias patches be used on radial tires?
No — the bias cord insert is built for bias-ply tires only. The crosswise cord arrangement matches the structure of a bias tire; using this patch in a radial tire goes against repair technology guidelines. For radial tires, radial-cord repair inserts should be used.
Which cements work with the 11-493 patch?
The manufacturer recommends Xtra Seal Standard cement (14-008) or Super-Blu (14-511) for cold-cure vulcanization. After mounting, sealing the patch edges and buffed surface with Sealiner is recommended.

