V3.20.7 Tubeless Truck Valve 9.7 mm - 6-20/10/V3-20-07
- Valve for trucks, 9,7mm rim hole. Bent. Tubeless. With metal cap.
Truck Tubeless Valve V3-20-07 (Ø9.7mm)
Screw-in metal valve, bent at 27° | 17-490C spring-loaded core included | Metal cap | Sold per piece
The V3-20-07 is a metal, screw-in valve built for tubeless wheels used in truck tyres. It shares its mounting hole, bend angle, and base height with the V3-20-04 and V3-20-05 (Ø 9.7 mm, 27°, 5 mm), and its length from the bend — 50 mm — sits right between those two models, giving one more option for matching a specific wheel setup.
What this valve is for
On a tubeless wheel, the valve itself — not a separate inner tube — is what keeps the air in, so its condition has a direct bearing on how airtight the whole wheel stays. The V3-20-07 screws in from outside the rim and matches a 9.7 mm mounting hole, and its low base height (5 mm) lets it sit close against the rim surface. The 27° bend angles the inflation tip to the side, which can be more convenient on certain wheel setups. A 17-490C spring-loaded core holds the pressure, and a metal cap keeps it clean between inflations.
Design and construction
Mounts directly into the rim hole.
Easier access when inflating.
The middle option between the V3-20-05 and V3-20-04.
Comes with a protective metal cap.
Dimensions and technical data
| Parameter | Value |
|---|---|
| Product code | V3-20-07 |
| Designation | V3-20-07 |
| Material | Metal |
| Wheel type | Tubeless |
| Application | Truck tyres |
| Installation method | Screws directly into the rim hole |
| Bend angle (α) | 27° |
| Length from the bend | 50 mm |
| Base height | 5 mm |
| Mounting Ø | 9.7 mm |
| Core included | 17-490C (spring-loaded) |
| Cap | Metal, included |
| Sold as | 1 piece |
Applications
- Tubeless truck wheels with a 9.7 mm mounting hole
- Wheel setups where the V3-20-05 is too short and the V3-20-04 is too long
- Replacing a single valve without disturbing the rest of the wheel
Frequently asked questions
How does this valve differ from the V3-20-04 and V3-20-05?
All three share the same mounting hole (Ø 9.7 mm), the same base height (5 mm), and the same 27° bend angle — the only difference is length from the bend. The V3-20-05 measures 40 mm, the V3-20-07 measures 50 mm, and the V3-20-04 measures 60 mm. It's the same shape offered in three lengths, chosen based on how much room a given wheel setup allows.
What's the point of the 27° bend?
The 27° angle points the inflation tip off to the side, making it easier to connect a pump or gauge in situations where a valve running straight out from the rim would be hard to reach.
What rims does this valve fit?
It's built for rims with a 9.7 mm mounting hole. Measuring the rim hole before ordering is worth doing to rule out a mismatch — at such a small diameter, even a slight difference matters.
Are any extra parts needed for installation?
No, beyond the valve itself with its 17-490C core and cap, which are already included. It's still worth checking the condition of the valve base and the rim hole during installation to keep the seating airtight.