Tube Patch - Large Oval 60x145 mm (1 pc) - 1-11-676
- Oval patch. For tube repairs. With blue vulcanizing gum, rubber. 6 x 14,5cm.
EURO Tube Patch 60×145 mm – Oval, Xtra Seal
Vulcanizing inner tube patch | EURO type, oval shape | Brand: Xtra Seal | Sold as: 1 pc.
The EURO tube patch 60×145 mm from Xtra Seal is the most elongated oval format in the EURO line — at 60 mm wide and 145 mm long, the aspect ratio reaches roughly 2.4:1. It's built for the longest lengthwise injuries on agricultural, industrial, and truck inner tubes, where the 115 mm of the previous format would already fall short of covering the full cut with proper margin at both ends. Applied with cold-cure vulcanization, it's built on a slit mylar backing, peeled off right before mounting.
Product Overview – EURO Tube Patch 60×145 mm 11-676
The patch consists of black rubber over a blue tie gum, which bonds it to the repaired tube surface once cured. Thin, even edges keep the patch lying flat against the tube, lowering the risk of the edges lifting over time and making it harder for dirt to collect around the repair.
The slit mylar backing is peeled off right before the patch is applied to the prepared, cement-coated tube surface — until that point, it protects the patch base from dust and accidental contamination.
Features and Specifications
2.4:1 aspect ratio — the most elongated oval format in the EURO line.
Creates a durable, sealed bond between the patch and the repaired tube surface.
Lower the risk of edges lifting and reduce dirt buildup around the repair.
Protects the patch base from contamination and peels off easily right before mounting.
Applied with Xtra Seal chemical cements, no heat required.
A format suited to tire repair shops and vulcanizing workshops.
Technical Specifications
| Parameter | Value |
|---|---|
| Part number | 11-676 |
| Brand | Xtra Seal USA |
| Product type | EURO tube patch, oval |
| Dimensions | 60×145 mm |
| Aspect ratio | approx. 2.4:1 |
| Material | Black rubber over blue tie gum |
| Protective layer | Slit mylar |
| Cure method | Cold |
| Application | Car, agricultural, and industrial tube repair |
| Sold as | 1 piece |
Applications
Where This Patch Is Used
- Repairing the longest lengthwise cuts in truck inner tubes
- Repairing very long abrasions and slits in agricultural tubes
- Repairing extensive lengthwise wall injuries in industrial inner tubes
- Tire repair shops and vulcanizing workshops
- Mounted with cold-cure vulcanization using Xtra Seal cements
Frequently Asked Questions
Can the EURO 60x145 mm patch be used with hot vulcanization?
No — this product is meant for cold-cure vulcanization with Xtra Seal chemical cements. For repairs that call for hot vulcanization or a two-stage method, look to other patches in the Xtra Seal range built for those processes.
How does this format differ from the oval 55x115 mm?
The 60×145 mm patch is 30 mm longer (145 mm vs 115 mm) and 5 mm wider (60 mm vs 55 mm), with the aspect ratio shifting from 2:1 to roughly 2.4:1. In practice, it suits injuries too long for the previous format — particularly on agricultural and industrial tubes, where long wall cuts are not uncommon.
Which cements and sealants work with the 11-676 patch?
The manufacturer recommends Xtra Seal's Standard cement or the blue Super-Blu cement for mounting, followed by Sealiner to protect the edges and buffed surface after the patch is applied.